Barn lighting installation Seattle — Extreme Handyman Service
Electrical Repair & Lighting · North Seattle & Bellevue

Wired Right. Every Time.

Expert electrician based in Fremont — outlets, panels, EV chargers, lighting, and smart home wiring. Guaranteed troubleshooting or no charge.

Est. 1991 · Licensed & Insured · ★★★★★ 60+ Reviews · Guaranteed Troubleshooting

Outlets, Switches and Circuits

Electrical Repair

When the Lights Don't Lie

Your home's electrical system is one of those things you never think about — until something stops working. A light flickers. A breaker trips for the third time this week. An outlet just stops working. Suddenly you're standing in the kitchen wondering whether to Google it or call someone.

Here's the honest answer: some electrical issues are simple. A tripped GFCI, a loose bulb, a breaker that needed a firm reset — these things happen and they're usually nothing to worry about. But electrical problems have a way of looking minor on the surface while something more serious is going on underneath. That's what makes them different from most home repairs.

What the Warning Signs Actually Mean

Flickering lights can mean a loose connection in your panel. A repeatedly tripping breaker can signal an overloaded circuit or a wiring fault. A warm outlet is never just a warm outlet — heat in an electrical component means resistance, and resistance means potential arcing, which is one of the leading causes of house fires.

Dead circuits that don't show an obvious tripped breaker are almost always a wiring issue somewhere along the circuit — a loose connection that worked fine for years and finally let go, a wire that got nicked during a renovation, or a GFCI outlet somewhere upstream that tripped and cut power to everything downstream.

Outlet and Dimmer Switch Repair

Few things in a home are more quietly frustrating than an electrical device that doesn't work the way it should. The outlet on the kitchen counter that stopped working. The dimmer switch in the dining room that buzzes faintly at every setting except full brightness. We diagnose, explain what we found, and fix it cleanly — no guesswork, no unnecessary parts, no surprises on the bill.

3-Way and 4-Way Switch Repair

Every home has at least one. The light switch at the top of the stairs that only works sometimes. When they work, they're seamless. When they don't, they're baffling. We sort it out cleanly, test every switching position, and leave everything working the way it was always supposed to.

Outlet and switch repair Bothell WA
Outlet and Switch RepairBothell, WA

Guaranteed Electrical Troubleshooting — Figure Out Any Electrical Problem Or It's FREE

Electricity is the one trade where the consequences of a mistake aren't immediately visible. Bad electrical work can look completely fine and still represent a fire hazard that won't announce itself for months or years. Tommy offers upfront prices to figure out ANY electrical problem or there is no charge.

  • Dead outlet diagnosis and repair
  • GFCI outlet installation and reset
  • Dimmer switch replacement
  • 3-way and 4-way switch repair
  • Dead circuit diagnosis
  • USB outlet upgrades
Lighting Installation

Recessed Lighting, Mood Lighting and More

Flat panel lighting Lake Forest Park WA
Flat Panel LightingLake Forest Park, WA

Recessed Lighting: The Upgrade That Changes Everything

Ask anyone who has had recessed lighting installed in a room that didn't have it before, and they'll tell you the same thing: they should have done it years ago. Recessed lighting distributes light evenly across the room instead of creating a bright center and dim edges. On a dimmer — which is almost always the right call — it gives you complete control over the mood of the room.

In existing homes, recessed lighting often means working in the attic or fishing wire through finished walls — which takes patience and experience to do cleanly, without leaving a trail of patched drywall behind. Done right, it looks like it was always there.

Mood Lighting: Because Your Home Should Feel as Good as It Looks

The typical home lighting setup is a single overhead fixture in the middle of the ceiling, blazing away at full brightness. Mood lighting is the art of layering light sources at different heights and intensities to make a room feel the way you want it to feel. Recessed lights on a dimmer for general ambiance. Under-cabinet lighting in the kitchen that makes the countertops glow. A wall sconce that adds warmth without overhead glare.

Recessed Lighting

Even distribution, dimmer-compatible, installed cleanly without leaving a trail of patched drywall. Layout planned for the room before a single hole is cut.

Ceiling Fans and Fixtures

Installation and replacement, including wiring a new circuit if your room doesn't currently have a ceiling box. Remote and smart control wiring available.

Outdoor and Shed Lighting

Weatherproof installations designed to hold up to Seattle's wet winters. Thoughtful outdoor lighting that extends the usability of your outdoor space.

EV Charging

EV Charger Repair

EV Charging Station Repair

When your EV charger stops working, it has a way of reorganizing your entire week. EV charging issues usually fall into one of a few categories — sometimes it's the charger itself, sometimes it's the circuit. We handle EV charger diagnosis and repair for all major charger brands, testing the full circuit from panel to plug.

Vehicle-to-Home Power

Certain EV chargers — paired with compatible vehicles like the Ford F-150 Lightning, Chevy Silverado EV, and newer Hyundai and Kia models — can reverse direction and push power from your vehicle's battery back into your home during an outage. A fully charged electric truck carries enough stored energy to power a typical home for several days. We handle the installation of bidirectional charger systems and the dedicated circuits they require.

EV charger installation Kirkland WA
EV Charger InstallationKirkland, WA
Panels and Backup Power

Panel Work, Generators and Transfer Switches

Whole House Surge Protection

A whole house surge protector is one of the genuinely worthwhile electrical upgrades a homeowner can make. One device, installed at the main panel, that stands between a voltage spike and every appliance, device, and piece of electronics in your home. The fair price for a whole house surge protector, installed correctly, should be $150 to $300 in most situations — device included. We charge fairly for this job because it's the right thing to do.

Generator Repair and Service

The frustrating truth about generators is that they're easy to neglect between uses. Old fuel that's gummed up the carburetor. A battery that's slowly discharged. Oil that hasn't been changed in three years. These are all fixable problems — but they tend to announce themselves at the worst possible time. We service and repair generators so that when the next outage comes — and in Seattle, it will — yours is ready.

Generator Transfer Switch Repair

The transfer switch is the component that safely connects your generator to your home's electrical system while simultaneously disconnecting from the utility line. Without a properly functioning transfer switch, your generator is just an extension cord situation. We test the full system, identify the fault, make the repair, and verify that everything transfers correctly before we leave.

Generator repair Bellevue WA
Generator RepairBellevue, WA
  • Breaker replacement and AFCI installation
  • Circuit analysis and capacity assessment
  • Whole house surge protection
  • Generator service and repair
  • Transfer switch installation and repair
Modern Home Systems

Smart Home Wiring and Mini Splits

Smart Home Wiring and Modern Upgrades

Smart switches, thermostats, doorbells, appliance circuits, and smart home upgrades — whole-home lighting control systems with full scene programming where a single tap sets the mood for dinner, a movie, or winding down for bed across every room simultaneously. Under-cabinet lighting with motion activation. Outlets with built-in USB-C charging at the right wattage to actually fast-charge modern devices.

Mini Split Installation

Seattle has a climate that likes to keep you guessing. Mini split systems are the answer a lot of Seattle homeowners have landed on — and for good reason. They heat and cool a space efficiently, they don't require ductwork, they're quiet, and they give you precise control over individual rooms. The bedroom that was always too hot in summer. The home office addition that the central system never quite reached.

Under counter light installation Lake Forest Park WA
Under Counter Light InstallationLake Forest Park, WA
Commercial lighting Renton WA
Commercial LightingRenton, WA

Have an electrical issue? Let's talk.

Expert electrician · Free estimates · Guaranteed troubleshooting

Serving Seattle's Neighborhoods

Electrical Service Across Seattle & the Eastside

Based in Fremont — close enough to be there fast, experienced enough to get it right the first time.

Tommy does electrical work in Seattle's neighborhoods. Not from a dispatch center in another city. Not a franchise with rotating technicians. One person, based in Fremont, who knows these houses — the older wiring in Ravenna bungalows, the panel quirks in Phinney Ridge Craftsmans, the addition wiring in Wedgwood ranchers.

Seattle homes tend to run older. Knob-and-tube in the attic of a Magnolia colonial. Undersized panels in Crown Hill homes that have never been upgraded. GFCIs that were added years ago in the wrong locations. These aren't generic electrical problems — they're Seattle problems, and knowing the difference matters when you're diagnosing something that has stumped two other electricians.

The service area runs east from Lake Union to Lake Sammamish, and north to Shoreline. Most calls in the core neighborhoods get a same-day or next-day response.

Fremont & Phinney Ridge

Home base. Older Craftsman and bungalow wiring, panel upgrades, and recessed lighting installs in houses built before circuits were sized for modern loads.

Magnolia & Crown Hill

A mix of original homes and newer construction. Knob-and-tube remediation, GFCI upgrades, and EV charger installs in garages that weren't built for them.

Ravenna & Wedgwood

Mid-century homes with panels overdue for evaluation. Circuit additions, surge protection, and lighting upgrades done cleanly without disturbing finished ceilings.

Kirkland & Bellevue

The Eastside corridor — same fast response, same flat pricing, same guarantee. EV chargers, panel capacity, and smart home wiring across the bridge.

Get a Fast Estimate

Need electrical help? Extreme Handyman has been in the trades since 1991. Call or request online — we respond fast.

📞 (206) 614-0001 Request Online
Why Neighbors Call Tommy
  • Guaranteed troubleshooting — figure it out or no charge
  • Upfront pricing before any work begins
  • 1-year labor guarantee on every repair
  • Expert electrician, based in Fremont
  • 60+ five-star reviews from Seattle & Bellevue homeowners
Common Questions

Electrical Service FAQ

Do you serve my neighborhood in Seattle?
Extreme Handyman serves the greater Seattle area including Fremont, Wallingford, Phinney Ridge, Magnolia, Crown Hill, Broadview, Wedgwood, Ravenna, Capitol Hill, Shoreline, Kirkland, Bellevue, and the Eastside. If you're not sure, just text or call — most calls within Seattle get a same-day or next-day response.
What does the guaranteed electrical troubleshooting mean?
It means Tommy will figure out the cause of any electrical problem — or there's no charge for the diagnostic. Most electricians charge a trip fee regardless of whether they find anything. This guarantee means you're not paying for a shrug.
How quickly can you respond to an electrical problem?
Most calls in the core Seattle neighborhoods get a same-day or next-day response. Text is fastest — (206) 614-0001. For urgent situations involving sparking, burning smells, or breakers that won't reset, call immediately.
What's included in the 1-year labor guarantee?
Every repair and installation includes a 1-year guarantee on the labor. If something related to the work fails within a year, it gets fixed at no charge. No questions asked.
How much does ceiling fan installation cost in Seattle?
Most ceiling fan installations run $150–$300 depending on whether there's an existing ceiling box and switch. If a new circuit or switch leg is needed, that adds to the job. Free estimate on the first call — you'll know the number before anyone shows up.
Why does my dimmer switch buzz and how do I fix it?
A buzzing dimmer is almost always a compatibility issue between the switch and the bulb type. LED bulbs need LED-rated dimmers — a standard dimmer on an LED load buzzes at every setting except full. The fix is usually a $15 switch and twenty minutes.
What should I do if an outlet stops working?
Check for a tripped GFCI first — there may be one upstream in the bathroom or kitchen that controls the dead outlet. If resetting it doesn't work, the outlet has lost its feed — a loose connection, a failed backstab, or a tripped breaker that doesn't look tripped. Diagnosis takes fifteen minutes.
Call Now