The Extreme Difference
Most homeowners have no idea what a fair price for home repairs looks like. So they do the responsible thing — collect estimates. Then they wait. Contractors show up late or not at all. The bids come back wildly different. Some exaggerate the work required. None give a straight answer. By the time it's over you've lost a week and you're no closer to getting anything fixed.
My approach is simple: tell you what it'll cost before I show up, then fix it right the first time.
Get a real price on the first call — no appointment, no runaround.
Get a Free Estimate →Lots of Questions. Free Answers.
From tripping breakers and dead outlets to recessed lighting, EV chargers, and smart home wiring — all work performed by Extreme Handyman Service.
- Outlet and dimmer switch repair
- Recessed and mood lighting
- EV charger repair
- Generator repair and transfer switches
- Mini split installation
- Smart home wiring
Cabinet installation, crown molding, bathroom remodels, structural framing, sheetrock repair, painting, door replacement, and finish work done with care and precision.
- Kitchen and bathroom remodeling
- Cabinet installation and trim work
- Sheetrock repair and painting
- Door replacement and repair
- Structural framing
- Sanding and refinishing wood
- Garage remodeling
Plumbing fixture installation, bathroom fan replacement, dishwasher installation, thermostat upgrades, and heating solutions for every room.
- Plumbing repairs and fixture installation
- Bathroom fan replacement
- Thermostat installation
- Space heater and radiant heater installation
- Dishwasher installation
All in One Visit.
Licensed work across Seattle and Bellevue. One call, one pro, everything handled since 1991.
Outlet & Switch Repair
Dead outlets, worn switches, and GFCI failures — among the most common calls and usually the fastest to fix.
- Outlet repair & replacement
- GFCI outlet installation
- USB outlet upgrades
- Switch replacement
- Dimmer switch installation
Lighting Installation
New fixtures, recessed lighting, under-cabinet lights, and outdoor lighting — design and installation from start to finish.
- Ceiling fixture installation
- Recessed lighting
- Under-cabinet lighting
- Outdoor & landscape lighting
- Dimmer & smart lighting controls
Ceiling Fan Installation
Fan installation and replacement — including wiring a new circuit if your room doesn't currently have a ceiling box.
- Ceiling fan installation
- Fan replacement & upgrade
- New ceiling box installation
- Remote & smart control wiring
- Fan wobble & noise repair
Panel Upgrades & Breakers
Older panels and frequently tripping breakers are safety issues. We upgrade and repair panels to meet today's demands.
- Breaker replacement
- AFCI & GFCI breaker installation
- Circuit additions
- Whole-home surge protection
EV Charger Installation
Level 2 EV charger installation for all major vehicle brands — permitted, safely wired, and ready for daily use.
- Level 2 (240V) charger install
- Dedicated circuit & breaker
- Permit handling
- Garage & outdoor installation
- Smart charger compatibility
Smart Home & General Wiring
Smart switches, thermostats, doorbells, appliance circuits, and general home wiring upgrades for modern living.
- Smart switch & outlet installation
- Smart thermostat wiring
- Appliance & dryer circuits
- Hot tub & generator hookups
to Take Seriously.
Electrical problems don't announce themselves. Here's what to look for — and what a single visit can solve.
Electrical problems can be stressful — but they don't have to be. At Extreme Handyman Service, I bring over 30 years of electrical experience to every job. Whether it's a tripping breaker, a sparking outlet, or lights that won't stop flickering, I'll diagnose the problem clearly, explain what's going on, and fix it right — with no hidden fees and a 1-year labor guarantee.
Signs You Need Help
- !Frequent breaker trips — overloaded circuit or panel upgrade needed
- !Flickering or dimming lights — may signal faulty wiring
- !Sparking outlets — a potential fire hazard; call right away
- !Burning smell or smoke — turn off power and call immediately
- !Buzzing sounds or hot outlets — faulty wiring requires prompt attention
- !Intermittent power loss — loose wiring or a failing component
Electrical Services Offered
Always shut off the circuit at the main panel before touching anything.
Use insulated screwdrivers, voltage testers, gloves, and safety glasses.
Appliances can hold a charge even when unplugged — handle with care.
Locate and reset GFCI outlets — they often control nearby outlets too.
This usually signals an overloaded circuit or a short. Try these steps first:
- Unplug or turn off devices on the affected circuit
- Reset the breaker at the panel
- Plug devices back in one at a time to find the cause
- If it keeps tripping, call us — it may need a panel upgrade
First, check whether the outlet is controlled by a nearby GFCI outlet — press its "Reset" button. If that doesn't fix it, we'll use a voltage tester to diagnose and repair or replace the outlet or switch.
Start with the simple checks — make sure bulbs are screwed in tightly and are the correct type for the fixture. If the problem continues, it may point to loose wiring or a faulty fixture that needs professional attention.
Intermittent power issues are often caused by loose wiring connections or a failing device. Inspect any visible connections for looseness, isolate which circuit or device is affected, and give us a call — this one usually needs a professional to diagnose safely.
This is a serious warning sign. Turn off power to the affected circuit immediately. Buzzing or heat at outlets typically indicates faulty wiring — do not use the outlet until it has been professionally inspected and repaired.
Not sure what's going on? Call or text Tommy and describe what you're seeing.
Most problems can be diagnosed over the phone in under five minutes.
Common Electrical Problems — Extreme Handyman Service Seattle
Why does my circuit breaker keep tripping?
A circuit breaker that keeps tripping usually signals an overloaded circuit or a short. Unplug or turn off devices on the affected circuit, reset the breaker at the panel, then plug devices back in one at a time to find the cause. If it keeps tripping, the circuit may need a panel upgrade.
Why is my outlet or switch not working?
First check whether the outlet is controlled by a nearby GFCI outlet — press its Reset button. If that doesn't fix it, a voltage tester can diagnose and repair or replace the outlet or switch.
Why are my lights flickering or dimming?
Make sure bulbs are screwed in tightly and are the correct type for the fixture. If the problem continues, it may point to loose wiring or a faulty fixture that needs professional attention.
What causes intermittent power loss in my home?
Intermittent power issues are often caused by loose wiring connections or a failing device. Inspect any visible connections for looseness, isolate which circuit or device is affected. This usually needs a professional to diagnose safely.
What should I do about buzzing sounds or overheating outlets?
This is a serious warning sign. Turn off power to the affected circuit immediately. Buzzing or heat at outlets typically indicates faulty wiring — do not use the outlet until it has been professionally inspected and repaired.
What are signs I need electrical help in my Seattle home?
Frequent breaker trips, flickering or dimming lights, sparking outlets, burning smell or smoke, buzzing sounds or hot outlets, and intermittent power loss are all signs that require professional electrical attention.
What electrical services does Extreme Handyman offer in Seattle?
Light switch and outlet repairs, ceiling fan installation and repair, indoor and landscape lighting, panel and circuit breaker repairs, GFCI circuits, dedicated appliance circuits, exhaust fans, floor heat, towel warmers, smart switches, and home automation.
I'm on the side of the homeowner: Many contractors across Seattle don't actually do any of the work themselves. At the same time, they have a hard time hiring competent subcontractors. The quality of the work suffers and the homeowner suffers. My mission is to bring affordable prices directly to homeowners then back that up with top quality craftsmanship.
BEFORE ARRIVING:
1) Detailed discussion of all work needed.
2) Set an agreed upon price.
3) Once it's acceptable to you, then we determine a time that's convenient.
AFTER ARRIVAL:
We do a complete walk through. You get to meet me and talk about your job.
JOB APPROVAL:
It's at this point that you make the decision on whether to have the work done.
If approved then I start work immediately; If not then there would be no charge.
You can text Tommy @ (206) 614-0001
(Please use text messages for efficiency. I will call you back quickly)
